Printing Your Photographs: Paper, Size and Soft Proofing

A photograph that only exists on a screen is a photograph that has not quite finished. Prints slow people down. They hang on walls and sit in boxes and get passed across tables, and they show you things about your own work that a monitor never will. But the first prints most of us make are disappointing: too dark, too flat, the wrong size for the room. This article covers the three decisions that fix most of that, which are the paper, the size and the soft proof, and what to do before you send a file to a printer.

Start with the monitor

The most common reason a print looks too dark is that the screen it was edited on was too bright. Monitors ship at brightness levels intended for a shop floor, and an image that looks right at that level will print two stops darker than expected. Calibrate the screen with a hardware device, set the luminance to around 80 to 120 candelas per square metre for print work, and view prints under a light of similar brightness and colour to the one you edited by. Without this step, every other choice is guesswork.

Choosing a paper

Papers divide roughly into glossy, semi-gloss or lustre, and matte, with a wide range of textures and base tones within each. Glossy papers give the deepest blacks and the widest colour range but show reflections and fingerprints. Lustre papers keep most of that range with a fine texture that hides handling and is the default for most labs. Matte papers, especially the heavy cotton rag types, have a beautiful surface and a warmer feel but a much lower maximum black, so shadows that looked rich on screen can turn grey.

Match the paper to the picture rather than choosing a favourite and using it for everything. High-contrast black-and-white work and saturated colour usually want a baryta or lustre surface. Soft portraits, landscapes with subtle tone and anything that will be viewed close up often suit a matte rag. Base tone matters too: a bright white base makes colours pop; a natural or warm white base flatters skin and gives a quieter, older feel. Order a sample pack, print the same image on each, and look at them in daylight.

Size, resolution and viewing distance

How big can you print? The honest answer depends on how far away the viewer will stand. A print viewed from arm’s length, such as in a book or a small frame, benefits from around 300 pixels per inch. A print on a wall viewed from two metres looks sharp at 150 pixels per inch and often at less. A 24-megapixel file, roughly 6000 by 4000 pixels, makes a superb 20-inch print at 300 pixels per inch and a perfectly acceptable 40-inch print for a wall. Resampling upward in a good RAW editor helps a little; sharp capture helps far more.

Think about the room before the size. A small print on a large wall disappears; a large print in a narrow hallway cannot be seen properly. Cut a piece of paper to the proposed size and tape it up for a day. Consider the border, too. A print with a generous white margin, matted and framed, reads as more considered than an edge-to-edge one, and the margin protects the image from the frame. Standard mat and frame sizes will save you money if you plan the print size around them.

Soft proofing: seeing the print before you make it

Soft proofing is the step that turns printing from a lottery into a craft. Every combination of printer, ink and paper has a profile, a small file that describes which colours it can reproduce. Labs publish theirs; printer manufacturers and paper makers publish theirs. Load the profile in your editor, switch on soft proofing, and the screen simulates how the image will look on that paper: usually flatter, sometimes with the deep shadows lifted and the most saturated colours pulled back. Tick the option that simulates the paper white and the black point, and be prepared for a shock.

Then adjust. Make a virtual copy of the edit and work on that so the screen version stays untouched. Add contrast to compensate for the paper’s lower range, bring the shadows down so they do not print as murky grey, and use the gamut warning to find colours the paper cannot hold, then desaturate them slightly rather than letting the printer clip them. Choose a rendering intent: perceptual compresses the whole range gently and suits most photographs, while relative colorimetric keeps in-gamut colours exact and is better for images with few saturated tones. Compare the two on screen and pick by eye.

Sending the file

Export at the print’s native size and resolution, in the colour space the lab or printer asks for. Most labs want sRGB; some accept a wider space with the profile embedded. Do not convert to the printer profile yourself unless the lab explicitly asks; that is normally the printer’s job, and doing it twice ruins the colour. Apply output sharpening for print, which is stronger than for screen because paper softens detail, and check it at 100 percent before sending. Name the file with the size and paper so that a reorder in a year is trivial.

  • Calibrate the monitor and set it to print-level brightness.
  • Choose paper by the image: gloss or lustre for punch, matte rag for subtlety.
  • Size for the viewing distance, and mock it up on the wall first.
  • Soft proof with the correct profile and adjust a virtual copy.
  • Export in the requested colour space with print sharpening applied.

Learning from the print

When the print arrives, look at it under good light and compare it with the soft proof. Note what is different: darker, warmer, flatter. Write it down, adjust the workflow and print again. The second print is always better than the first, and the fifth is usually right. Small test strips, a few centimetres wide, printed from the most difficult part of the image, cost pennies and save whole sheets. Over time you will know how a given paper behaves without proofing at all, but that knowledge only comes from making prints, holding them and looking.

There is one more benefit. A wall of your own prints is the harshest and most useful critic you will ever have. Pictures that looked strong on a screen fade after a week on the wall, and quiet ones grow. Print more than you think you need to, and let the prints do the editing.