Buying Used Camera Gear Without Getting Burned

Most of the gear in our bags was bought used. Camera bodies lose 30 to 50 percent of their value in the first two years while doing exactly the same job, and lenses barely change from one decade to the next. The savings are real, but so are the horror stories: the body with a shutter on its last legs, the lens with a fungus garden behind the front element, the seller who vanished with the deposit. Everything below comes from our own mistakes and the routine we now follow every time.

Where the value is and where the risk is

A full-frame mirrorless body that sold for USD 2,000 three years ago is now USD 900 to 1,200 used. A professional 24-70 mm f/2.8 zoom from the previous generation is USD 700 to 1,100 against USD 2,000 new, and it will produce nearly identical files. Prime lenses hold value best, often 70 to 80 percent of their new price for years, which means less saving but also less risk when you sell them on. Bodies carry the most risk because they contain the moving parts: shutter, sensor, card slots, buttons, battery contacts. Lenses carry moisture and impact risk. Accessories like flashes, tripods and bags are low risk and often the best bargains of all.

Checking a used body

Start with the shutter count. Most bodies write it into the metadata of each file, and free tools read it from a raw or JPEG taken on the spot. Mechanical shutters are typically rated for 150,000 to 400,000 actuations depending on the tier of the body; a count under 30,000 is lightly used, 30,000 to 100,000 is normal for an enthusiast, and over 150,000 on a consumer body deserves a lower price. Electronic shutter use does not count, so a low number is a good sign but not a guarantee.

Test the sensor. Set the lens to its smallest aperture, f/16 or f/22, point the camera at a plain bright surface such as a white wall or an overcast sky, defocus, and shoot. Then look at the file at 100 percent for dust spots, which are normal and cleanable, and for hot pixels, dead pixels or scratches, which are not. A long exposure of 30 seconds with the lens cap on will show hot pixels as coloured dots; a few are fine, dozens are a sign of an ageing sensor.

Then work through the small things: every button and dial, both card slots with a card you brought, the hot shoe with a flash, the battery door latch, the tripod socket threads, the rubber grips for peeling, the viewfinder for dust, the rear screen for scratches and dead pixels, and the lens mount for wear. Fire a burst to hear the shutter; irregular rhythm or a squeal means trouble. Check that autofocus locks and that in-body stabilisation makes a faint noise when engaged.

Checking a used lens

Take a small torch. Shine it through the lens from the rear with the aperture wide open and look from the front, then reverse. You are looking for three things. Haze is a faint milky film on internal surfaces, often from evaporated lubricant; it reduces contrast and is expensive to clean. Fungus looks like a spider web or frost pattern spreading across an element; it etches the glass and can spread to other lenses in the same bag, so we walk away from it at any price. Dust is small dark specks and is almost always harmless; every lens over a year old has some.

Check the aperture blades by stopping down and watching them close; oil on the blades looks shiny and causes sticky, slow operation. Turn the focus and zoom rings through the full range feeling for grit or uneven resistance. Look at the front and rear elements at an angle in good light for scratches and coating marks; light cleaning marks are cosmetic, a deep scratch in the centre is not. Mount it on your own body, focus at infinity and at close range, and shoot a flat wall at the widest aperture to check that both sides are equally sharp; a lens that is sharp on the left and soft on the right has been dropped and decentred.

Buying at a distance: return windows and paperwork

When we cannot handle the item, the return policy is the inspection. Reputable used dealers offer 14 to 30 day returns and a 3 to 12 month warranty, and their grading systems, from like new down to well used, are broadly honest because their reputation depends on it. Expect to pay 10 to 20 percent more than a private sale for that safety, which for anything over USD 500 we consider well spent. On auction and marketplace sites, read the return terms before bidding, insist on photographs of the actual item including the serial number, and pay by a method that offers buyer protection. Never pay by bank transfer to a stranger for an item you have not seen.

  • Ask for the shutter count and a recent test frame before agreeing on price.
  • Confirm the serial number against the photos and the invoice if there is one.
  • Check that the serial is not listed on a stolen gear registry.
  • Read the return window and who pays return shipping.

Meeting in person

For private sales, we meet in a public place with good light and a table, such as a busy cafe, and we bring our own body, card, battery and torch. We allow 20 minutes for the checks above and we do not let the seller rush us. A seller who refuses to let us mount the lens or shoot a test frame is telling us something. Agree the price after inspection, not before, and be willing to walk away; there will always be another copy of a common lens next week. Ask why they are selling and whether they are the first owner. The answers are less important than how easily they come.

Prices: know the market before you talk

Spend ten minutes checking recent sold listings, not asking prices, for the exact model and condition. A fair private-sale price is usually 15 to 25 percent under the dealer’s used price, which itself sits 30 to 50 percent under new. Older mirrorless bodies from five or more years ago drop under USD 500 and remain excellent cameras. Older professional lenses, especially those replaced by a newer version, are the sweet spot. Bought this way, used gear is not a compromise; it is how most working photographers have always built a kit.